![]() So these aren’t really what I would call daytime pictures, but they’re not nighttime pictures, either. so it was still pretty dark in the room and I had to turn on the lights. It was still pretty early, and I took these before the sun had risen above the trees. ![]() I’d love for you to join me on my actual website! You can click here to find this post on Addicted 2 Decorating.Īnd then here’s what it looked like early this morning. Note: If you’re reading this post on a website other than Addicted 2 Decorating, you’re on a website that steals content from bloggers, and is using my content without my permission. Here are a couple of pictures of what the finish looked like last night before I went to bed… I just can’t decide if it’s still too dark. It was still very wet (and very dark) in this picture.īut as you can see, it all lightened up a bit when it was dry. ![]() I wasn’t wrong.Īnd here’s how that last area looked immediately after I finished. That base coat is Behr Aqua Rapids, and I told y’all that the final color would be deeper, richer, and bluer. But it dried just a little bit lighter.Īnd you can see the difference between the base paint color I used and the Venetian plaster finish. Right after I did this part of the wall and stood back to look at it, I was fully convinced that it was too dark for the final coat. Interestingly, this product lightens up a bit after it dries, which is the very opposite of what latex paint does. This is how it looked last night after it was dry. It’s so rich, and has such a velvety appearance. I knew it was darker than what I had been envisioning, but my thought was that I could use the darker color for the first coat, and then take it back and have them lighten it up considerably, and do the second coat with the lighter color.īut after doing one coat with the darker color, now I’m unconvinced that it needs to go lighter. When I did the mock ups of the walls with the wall mural, I used a similar light color…īut when I went to the local Benjamin Moore store to get the Modern Masters Venetian plaster finish mixed, the girl mixed it considerably darker. In fact, it’s similar to the paint color I have on my kitchen cabinets. One of the characteristics of microlime is that you can install over tiles without making any demolition.It’s kind of a soft but light teal color. Its handcrafted application makes each work an even more unique and exclusive one… Incomparable, for you will not find two identical surfaces. ![]() Give a unique and personal style to your rooms thanks to the different textures (thick, medium, or thin), the variety of colors, the distinct varnish finishes (matte, polished, or glossy), or the metallic paints and glazes. Microlime have a wide variety of possibilities and finishes, where your imagination is the limit. It is a material suitable for indoors and outdoors it can be applied to floors, walls, Countertops, showers And the best part is you don’t need joints! This way, it is easier to clean and preserve. this is our own mix formula a more updated formula in comparing with traditional microcement Is a decorative coating composed of cement and Lime Marble top coat, water-based resins, additives, and mineral pigments. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |